About Settings please
Status->WAN IP. If connection status is connected and WAN ip is not 0.0.0.0, you can get online now. If not, please go to the next step. (2) Please Click Advanced Settings on the left side, choose MAC address Clone. Then click on “Clone MAC address” and then click on “Apply” to save your settings. The router will reboot. After the reboot, please go back to check the Connection status and WAN IP again. If it is still connecting, please go to the next step. (3)If it is still connecting and the WAN IP is 0.0.0.0, please power off your modem and router, then power them on, go back to the homepage of tenda router .then click System status in the middle page, and find connection status and WAN IP. If it is still the same, please contact us! IV, Steps to do wireless settings 1. Please Click WLAN Settings, then click Basic Settings to set the name of your wireless network, please change the SSID to tenda123 (the name of wireless network) and choose channel 6, then click Apply to save the settings. 3. Click WLAN Settings, then click Security Settings to set the password. Please choose WPA-Personal as Security Mode and AES as WPA Algorithms. In the blank of the Pass Phrase, please type your password which should be at least eight characters, then click Apply to save. V．Connect computers to Internet wirelessly. Please find the name of your wireless network (it is SSID which is your family name) and connect to it. It will require you to input password, please type password (It is the passphrase which was made by yourself just now.) After that, you can enjoy the internet wirelessly. If you don't know how to connect to your Wi-Fi, please click this link How to setup
Key features of the Settings please that are enabled through these drivers include:
- Help with Color Management settings in FRV, please
- SHORT N' SWEET SET - Please - Patreon
- UserWarning: The `style` method is deprecated. Please set
- Recommend me CableNut settings please - TestMy.net
- cablenut settings please - Make it Faster - TestMy.net
- Please set your mic to Push-To-Talk ::
- No internet and internet settings crash help please
The british offocial system use a gridshift methods to convert positions, which must be manually added (either OSTN15 or OSTN02)You can find the grids on the UK Ordnance Survey website : POSPac settings : Under the export settings, please make sure to replicate the below entries. The selection of OSGM15 will allow to be in the correct vertical system. The Mapping Frame must be changed into ETRS1989, at epoch 1989.0, as it is the reference frame on which OSGB is based for its conversion.Export your sbet file.2/ CloudStation settings : As a pre-requisite, please download the OSTN grid shift - this needs to be copied in your CloudStation installation. The grid shift files can be obtained here : Under 'Everything you need' you have NTv2 format files (28Mb) leading to the below download : Once downloaded, please extract and copy the two .gsb files to the CloudStation folderC:\Program Files\YellowScan\CloudStation\proj\share Once copied it should look like this including the x2 OSTN15 grid shifts. Now, to generate your lidar data, please make sure your project settings are set with the correct sbet file with the Z ref entered at POSPac elevation. Run Strip adjustment, Terrain, eventually Colorization and once happy with the point cloud extraction, in the export tab, please change the export settings as below : Select 'other' and make sure : i/ you define the folder path where you copied the 2 gsb files under 'Manage grid-shift search paths' ii/ search for the EPSG 27700 projection code Once these settings have been entered, you can click 'export'.Please mind you that the export process is fairly lengthy so please be patient. It is inherent to the use of NTv2 grids.
